Skip to content

Free U.S. shipping·Ships in 1 business day from U.S. stock

Questions? Email us
EASYLONGER
Tell us what we should fixWebsite, product or service. We'd rather hear the hard truth.Share your feedback
AccountRewardsTrack order

Questions? Email support@easylonger.com. We usually reply within 12 hours.

Cart
Cables

Universal CPAP DC Power Cord

Runs ResMed and Philips machines from a 12V or 24V car socket, with USB ports for your phone.

Tips for ResMed S9, AirSense 10 / AirCurve 10, AirSense 11 / AirMini, Philips DreamStation / DreamStation 2.
$42.99Regular price $45.99Save $3.00

Free U.S. shipping · Ships from U.S. stock in 1 business day · 30-day returns

1

Not sure it's the right cable? Email support@easylonger.com with a photo of your CPAP's power adapter label. We usually reply within 12 hours.

A closer look at the YN056

Voltage and ports at a glance.

The display shows DC voltage beside the USB-C, USB-A and DC output ports.

Switch off between uses.

Plug into a 12V or 24V car socket and switch the power off between uses.

Connected in three steps.

  1. Use the car socket.

    Tips for ResMed S9, AirSense 10 / AirCurve 10, AirSense 11 / AirMini, Philips DreamStation / DreamStation 2.

  2. Connect the cable.

    Car-socket end into the socket, CPAP end into your machine's power port.

  3. Turn on your CPAP.

    Check the cable and the voltage against your CPAP's power adapter label.

Pairs with these EASYLONGER batteries.

Specifications

Input
12V/10A or 24V/5A
DC output
12V/5A, 24V/3.5A
USB-C
30W
USB-A
18W
EASYLONGER Universal CPAP DC Power Cord for ResMed and Philips — 12V/24V Car Socket
  • 5 stars: 8 (67%)
  • 4 stars: 3 (25%)
  • 3 stars: 1 (8%)
  • 2 stars: 0 (0%)
  • 1 star: 0 (0%)
K
Kris
For UPS (uninterrupted power system)

This accessory is absolutely necessary in order to establish with the EasyLonger battery an "Uninterrupted Power Supply" system for the CPAP device.

Kris review photo
D
Dave mcfadden
C-pap acc.

Tried them work perfect

D
Dave
As advertised.

As advertised.

F
FruitFly
Possibly defective?

Not sure if mine is defective or not. Easy setup, and I triple checked the settings. I have the AirSense 10 (ResMed) so need 24V. It'll go on and blink, switch from 12V to 24V and back easily, then stay on 24V. Easy to make sure everything is fully plugged in, etc. The CPAP will run on this, pass-through, for a while (not sure yet how long), but then stop suddenly. I've tried it out a few nights, plus naps and while watching TV to make sure I'm doing everything correctly. It stops! So crazy. I'm running this (Easylonger car adapter thing) with Easylonger battery, as "pass-through:" Plugged into my outlet, with the two Easylonger devices between outlet and CPAP, so they charge up, stay charged, and will keep running even if there's a power outage. Any tips, friends? Does it sound like mine is defective? My CPAP runs at 24V, so I keep checking that all devices are plugged in correctly with correct adapters, connections are tight, everything is on 24V, etc. No clue what's up. I even have it all coming through a surge protector, just in case, and that works perfectly with other devices.

P
PAPApotatos
First night use on correct setting, 24V Resmed AirCurve. Converter box didn't get hot

One night use. My initial review on this adapter is a go! It does cost more but i actually like that it has a on/off switch right on plug car adapter. It would've been annoying pulling out this car adapter to turn off but they instinctively thought about on/off switch. I was worried about temperature like my OEM 🔌 Resmed power block, gets warm. But this one car adapter, did not heat up, using my hand as test. I plugged it into a car inlet, using Eccoflow solar battery and had plenty of battery left after six hours. Most of all, i love the USB-C, which was used for time of rest, charging my ipad mini, whileUSB-A charged phone. I will definitely buy again. :). Happy customer for one night of use. Durability is unknown as of yet.

M
MikeNZ
Just what I needed

Excellent

P
Pierre
Excellent

Appareil indispensable pour garder un CPAP fonctionnel en tout temps. Fonctionne tel que prévu avec le dispositif approprie. Je recommande

H
Harley
Can't go wrong with this product.

Well priced and manufactured. A must if you're a camper, traveler or live in areas subject to power outages. All CPAPs run on 12 volt. So plug it in to car or battery pack with its 'cigarette light' connection and you're good to go for up to 3 days.

A
Amazon Customer
Great battery

Only used twice, but worked perfectly with my Resmed Airsence 10! My only concern is that it's hard to figure out how to change the ES400 from my solar panel or the vehicle cigarette lighter.

C
Craig
Compact and useful for Resmed without humidifier

I received great customer service from the seller - prompt and informative replies. Note that if you have a ResMed AirSense/AirCurve 11, then this adapter works best if you do not use the AirSense 11 ClimateLine Air Heated Tube and humidifier at high humidity/auto settings. You probably don't want those features on unless you have a BIG battery :-). This adapter is lighter and smaller than the heavy and bulky ResMed 12v adapter - which costs twice as much or more!

C
Colin JJ
If you have cpap and this works with you unit it's a must have! Don't hesitate

I've been looking at power adapters for my cpap for awhile settled on this unit I love camping (tent/canoe) but don't power obviously so I went without my cpap, now I don't have to I have a small power station with lithium batteries and I can go a full week running just my cpap without charging. Dc to Dc hook up way more energy efficient!!! The other way most people do it plug in their cpap to 110v inverter so your going from a battery inverting to ac 110v then the machine is inverting back to Dc you essentially inverting power 2X and you power losses in the inversion is huge. This unit make it more sense and allows days of power difference.

K
Krychek
Perfect for camping trips using Jackery .

It works for all my 3 CPAP machines .

Rewards